0

Hydraulic Cylinder Tie Rod Type

Hydraulic Cylinder Tie Rod Type
Hydraulic Cylinder Tie Rod Type
Price And Quantity
  • 1
  • Ton/Tons
    Product Specifications
    • Stainless Steel
    • Other
    • Hydraulic kilogram-force (kgf)
    Product Description

    Owing to our modern production technologies, we are considered as the prominent manufacturer and exporter of Hydraulic Cylinder Tie Rod Type. Our entire range of hydraulic cylinders is manufactured using certified quality materials that are procured from trusted vendors of the market. Suitable for low pressure conditions, these hydraulic cylinders are broadly used in machine tool & short stroke applications. Our Hydraulic Cylinder Tie Rod Type is corrosion resistant and appreciated among our clients for its excellent durability and fine finish.

    Specifications :

    STANDARD & NON STANDARD Cylinders, range From 25 mm bore and up to 350 mm bore with the stroke length from 10 mm and up to 5000 mm.working pressure 500 kg/ cm2

    Type of Mounting

    • Front & Rear Trunion / flange mounting / foot mountings Clevis mounting / double female clevis mounting at rear end & intermediately function mounting.

    Seals

    • Hallate & Parker Seals.

    Honed Tube

    • All the tubes are micro honed for superior surface finish with Ra value less than 0.3

    Piston Rod

    • En - 8 to En - 353 are ground and hard chrome plated with 25 microns minimum plating thickness

     Specifications




      Maximum Stroke
     
        The maximum distance the shaft travels from fully retracted to fully extended.
     
      Search Logic:     User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
      Operating Pressure
     
        Full required range of operating pressure.
     
      Search Logic:     User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
      Bore Size
     
        Specify desired bore if unlisted above.
     
      Search Logic:     User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
      Shaft Diameter
     
        Diameter of shafting; largest diameter if there are different diameters.
     
      Search Logic:     User may specify either, both, or neither of the "At Least" and "No More Than" values. Products returned as matches will meet all specified criteria.
    Cylinder Configuration




            
      Your choices are...
     
         
     
      Simple Configuration
     
        A simple cylinder configuration consists of a single rod that can only travel the length of its rod and back.
     
      Telescopic Configuration
     
        A telescopic configuration cylinder uses "telescoping" cylindrical housings to extend the length of the cylinder. Telescopic configuration cylinders are used in a variety of applications that require the use of a long cylinder in a space-constrained environment.
     
      Cylinder - Rodless
     
         Rodless cylinders are linear devices that use pressurized fluid to move a load within many power transfer operations.
     
      Cable Cylinder
     
        Cylinder has cables emerging from end(s) through a gland seal. The cable then passes up around a pulley and connects with the moving element, whose other end is attached to the cable from the opposite cylinder end.
     
      Magnetically Coupled
     
        Magnetically coupled cylinders maintain an enclosed cylinder; stage is moved by magnetic field coupling with the moving cylinder flange.  Design prevents contaminant entry into cylinder.
     
      Search Logic:     All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
    Cylinder Action




            
      Your choices are...
     
         
     
      Single Action
     
        A single action cylinder is pressurized for motion in only one direction. A spring is frequently used to bring the cylinder piston back to the original position.
     
      Double Action
     
        A double action cylinder can move along the horizontal (x-axis) plane, the vertical (y-axis) plane or along any other plane of motion. Both sides of cylinder piston can be pressurized for reversible motion.  Force ratings can differ somewhat in opposite directions.
     
      Other
     
        Other unlisted, specialized, or proprietary cylinder actions.
     
      Search Logic:     All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
    Features




            
      Your choices are...
     
         
     
      Adjustable Stroke
     
        End points or total stroke length can be adjusted.
     
      Bumpers / Cushions
     
        Cushions or bumpers for softening impact at ends of stroke.
     
      Closed Loop Control
     
        This is sometimes called servo control. The cylinder has external devices that feedback a signal to the pump control giving it position information. A type of configuration is to use a servo / proportional valve on the cylinder.
     
      Double End Rod
     
        Rod extends out of both ends of cylinder with attachment features such as threads on both ends.
     
      Holding Brake
     
        Works in conjunction with the self-locking feature to increase holding force.
     
      Integrated Overload Slip Clutch / Torque Limiter
     
        A device used to allow for slip when torque exceeds overload limits.
     
      Integral Flow Control
     
        Integral flow control incorporates a flow control valve or device that limits the amount of air or fluid that enters the cylinder.
     
      Integral Sensor
     
        Cylinder is equipped with an integral sensor to monitor position and/or proximity.
     
      Intrinsically Safe
     
        The cylinder can be used in hazardous environments.
     
      Magnetic Switch
     
        Magnetic switch (Hall effect sensor, reed switch) indicates whether thruster position is in retracted or extended position.
     
      Multi-position
     
        Endplate can be actuated to different positions along its stroke, not just the endpoints.
     
      Non-rotating
     
        Multiple rods or key feature to prevent the plunger from rotating.
     
      Protective Boot
     
        Covers that protect moving parts against environmental damage.
     
      Self-locking
     
        When there is a loss of signal, the device will lock to its current position.
     
      Shock Absorbers
     
        Pneumatic or hydraulic fluid absorption of shock.
     
      Thermal Overload Protection
     
        Motor has a thermal switch which trips when a preset temperature is exceeded.
     
      Water Resistant (Sealed)
     
        Rated to resist moisture which could cause corrosion.
     
      Other
     
        Other unlisted, specialized, or proprietary
     
      Search Logic:     All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
    Body Material




            
      Your choices are...
     
         
     
      Aluminum
     
        A bluish silver-white malleable ductile light trivalent metallic element that has good electrical and thermal conductivity, high reflectivity, and resistance to oxidation.
     
      Steel
     
        A commercial iron that contains carbon in any amount up to about 1.7 percent as an essential alloying constituent. It is malleable when under suitable conditions, and is distinguished from cast iron by its malleability and lower carbon content.
     
      Stainless Steel
     
        Stainless steel is chemical and corrosion resistant and can have relatively high pressure ratings.
     
      Plastic
     
        Any of numerous organic, synthetic, or processed materials that are mostly thermoplastic or thermosetting polymers of high molecular weight and that can be made into objects, films, or filaments.
     
      Other
     
        Any plate material not listed above.
     
      Search Logic:     All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
    Cylinder Mounting




      Mounting Options     
      Your choices are...
     
         
     
      None
     
        A cylinder that has no designated method for mounting.
     
      Clevis or Eye
     
        Cylinder is equipped with a clevis or eye attachment, which connects to the extended end of cylinder piston via threads.
     
      Double-end Mount
     
        Nose and rear contain threaded bosses for nut attachment.
     
      Flange
     
        Cylinder is equipped with a mounting flange or bracket.
     
      Floating Mount Bracket
     
        Cylinder is equipped with a floating bracket for more convenient installation.
     
      Foot
     
        Cylinder is equipped with a foot mounting bracket. A foot bracket is a type of flange, which rests underneath the cylinder.
     
      Lug
     
        Lugs are short blocks attached to the side of the cylinder that have holes used to allow mounting to another surface.
     
      Face Mount
     
        Threaded holes on front face for attachment.
     
      Nose Mount
     
        Nose is threaded for mounting through hole with nut on other side.
     
      Rear Mount
     
        Rear has tapped holes or mounting flange.
     
      Threaded
     
        Cylinder is designed to mount to bolts via threaded holes in the cylinder head or cap.
     
      Trunnion
     
        Cylinder is equipped with a trunnion mount. A trunnion is a specially designed mounting block, and can be located at the cap, head, or intermediate location.
     
      Other
     
        Other unlisted, specialized, or proprietary mountings.
     
      Search Logic:     All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
      NFPA Mounting?
     
        Mounting geometry conforms to standards of the National Fluid Power Association (NFPA). Several standard configurations fall under the NFPA designation.
     
      Search Logic:     "Required" and "Must Not Have" criteria limit returned matches as specified. Products with optional attributes will be returned for either choice.
      Mount Location:     
      Your choices are...
     
         
     
      Cap
     
        Mount is located at the cap, also referred to as base or rear, of the cylinder.
     
      Head
     
        Mount is located at the head, also referred to as front or face, of the cylinder.
     
      Intermediate
     
        Mount is located at the intermediate area, or center of the cylinder.
     
      Other
     
        Other unlisted, specialized, or proprietary mounting locations.
     
      Search Logic:     All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.
    Cylinder Style




            
      Your choices are...
     
         
     
      Tie-rod
     
        A cylinder that uses one or more tie-rods to provide additional stability. Tie-rods are typically installed on the outside diameter of the cylinder housing. In many applications, the cylinder tie-rod bears the majority of the applied load.
     
      Smooth Body
     
        Cylinder body encases piston.
     
      Pancake
     
        Shorter length and larger diameter than other styles.
     
      Miniature
     
        A cylinder that operates in the same manner as a regular sized cylinder except its profile is smaller and the body may be threaded for mounting purposes.
     
      Multiple Bore
     
        Two or more bores and pistons combined or stacked in same cylinder.
     
      Ram
     
        A ram is a device in which the cross-sectional area of the piston rod is more than one-half the cross-sectional area of the moving component. Rams are primarily used to push rather than pull, and are most commonly used in high pressure applications.
     
      Rectangular
     
        Cylinder encased in a rectangular "box" shape frame.
     
      Rotating
     
        Air or hydraulic powered rotating cylinders that are well-suited to handle a wide range of high performance chucking applications.
     
      Welded
     
        A smooth hydraulic cylinder that uses a heavy-duty welded cylinder housing to provide stability.
     
      Other
     
        Other unlisted, specialized, or proprietary cylinder styles.
     
      Search Logic:     All products with ANY of the selected attributes will be returned as matches. Leaving all boxes unchecked will not limit the search criteria for this question; products with all attribute options will be returned as matches.























































    Trade Information
    • 50 Per Day
    • 1 Week
      Contact Us

      No. C-13, Mogappair Industrial Estate, Mogappair West, Near M.G.R. Statue, Chennai Tamil Nadu India +918037303395
      Phone :+918037303395